Do not want to spoil the interior of a wooden house clumsy wiring, improper electroaccessories. At the same time, security, and demands SNIP impose significant restrictions on the ability of a covert Posting in the wooden walls. How to make invisible wiring, lighting, beautiful, and the whole system – convenient and safe? Open wiring. The easiest way to run wiring open – to dissolve the wires on the walls. In some cases, you can use the cable channels (boxes) of non-combustible material, but most of them refuse to aesthetic reasons. Often make the wiring 'antique' – fixing a wire on porcelain insulators. Picking the proper series of wiring accessories (eg, Berker '1930 '), you can turn a utilitarian task of routing the wires in a stylish design element. Concealed wiring in a wooden house.
Wiring in the ceiling allowed to perform in the tubes from self-extinguishing plastic, provided that the cable and the pipe is not the mechanical action. In the general case, concealed wiring must be done in metal pipes or metal hose, grounded on both sides of each line hoses. Log house is subject to 'shrink', so the logs do not have to provide mechanical action on the padded metal hose and cable in a cable through the walls are made through metal casings. So, if you do not want to use external wiring and minimize the length of the costly and complicated wiring in metal hose, you need special solutions. One of them is to use the control on radio bus – then the wiring to the ceiling light, for example, carried out in nadpotolochnom space, and stand-alone switches on the battery are placed in any convenient location.